Rabbit fencing to protect crops and pasture

Page last updated: Monday, 17 October 2016 - 1:16pm

Please note: This content may be out of date and is currently under review.

This article describes the use of fencing to protect crops and pasture from rabbits in bush remnants.


Rabbits cause $206 million annual loss to Australian agricultural production and have a well-documented history for causing environmental damage.

In Western Australia, some areas of native vegetation on farms have been retained, particularly on sandy ridges that would otherwise be subject to wind erosion. These bush remnants are a major refuge habitat for rabbits. These rabbits can cause considerable damage to nearby pastures and crops.

Some measure of rabbit control can be achieved by poisoning around these bush remnants in late summer or autumn, prior to seeding. To be effective, this approach usually needs to be repeated annually. However, rabbit densities and resulting crop and pasture losses can still be unacceptably high unless any remaining rabbits are removed.

Clearing of the bush remnants to eradicate the resident rabbit populations is not an acceptable option. Not only do these remnants have intrinsic conservation value, but some are also located along protected road reserves. So what can be done in these situations?

Rabbit-proof fencing

The use of rabbit-proof fencing is not a new approach but nowadays tends to be overlooked as a viable option by the majority of landholders because of its relatively high initial cost. Landcare professionals are also concerned that any rabbits remaining in fenced off native bush remnants could decrease the long-term viability of these remnants.

A recent study in the south coastal region of Western Australia investigated the benefits and costs of fencing off areas of remnant vegetation to prevent rabbit damage to surrounding crops and pastures. It also examined the effects of fenced-in rabbits on the native vegetation itself. Crop losses caused by rabbits in areas adjacent to unfenced areas were also evaluated.

To be effective, the fence should be approximately 900mm high, with the bottom 150mm bent to lie on the ground facing towards the expected direction of future pressure from rabbits. This ‘apron’ will usually face away from the bush remnant and can be secured with rocks or soil. Alternatively, the netting can be buried vertically at least 150mm below ground level. If necessary, the height of the fence can be increased by attaching additional repair netting (300mm wide) to the top of the fence.


Rabbit-proof fences can provide complete, long-term protection for crops and pastures adjacent to fenced bush remnants, and even the best poisoning campaign cannot achieve such a result. Nevertheless, to be totally effective these fences need to be checked regularly so that any breaches are promptly repaired.

If all rabbits are completely removed from within the fenced bush refuge, then no further control action is necessary. But, if rabbits persist, even at low numbers, remedial action will be needed to make sure that the residual rabbits do not affect the viability of the bush remnants.

Another advantage of fencing-off a bush remnant is that stock are excluded, thereby reducing any damage to the native vegetation and hence preventing any future soil erosion.


The cost of erecting a rabbit-proof fence for high value crops such as canola could be recovered within two seasons, depending on the amount of fencing needed and on crop returns. For crops of a lesser value (such as lupins and barley) the costs of fencing can be defrayed over the life of the fence. There are also tax benefits to landholders (for example, depreciation). If well maintained, most fences should last for at least 15 years.

Effects on remnant vegetation

Even low numbers of residual rabbits in the fenced-off bush will lead to reduced abundance of sedges and native grasses, and of seedlings and regenerating plants. The effect of confining rabbits over the medium to long term will ultimately be detrimental to the overall ‘health’ of the native vegetation, affecting both the abundance and biomass of many plant species. Therefore, measures need to be taken to remove all remaining rabbits.

Poison baiting with 1080 is a good technique for removing remaining rabbits. This may be more effective because the rabbits are confined within the bush remnant, particularly if they are targeted when available food is in short supply during the summer and autumn. However, the best approach is to remove all rabbits before totally enclosing a bush remnant. This may require a combination of 1080-baiting, shooting and possibly live cage trapping.

Other considerations

If all rabbits are not totally removed from the fenced-off area, a regular poisoning program will be needed to prevent long-term damage to the bush remnants. If this becomes necessary it may well create a situation that may be no better than the use of routine rabbit control techniques without a fence.

The use of bait stations may help with controlling the rabbits within the bush refuge, where the rabbit-proof fencing prevents stock access. Bait stations can reduce the potential risks to non-target species. However, bait stations should not be left permanently loaded with poison bait, as this is likely to increase the development of resistance to the poison being used.

In some situations the fence may also interfere with the movement of other animals (e.g. kangaroos and wallabies) whose welfare and conservation would need to be considered. The merits of each case should therefore be assessed on an individual basis.

Further information

For further information on rabbits and rabbit control, search our website, or contact the Pest and Disease Information Service.

Contact information

Pest and Disease Information Service (PaDIS)
+61 (0)8 9368 3080